XG-D-40全自动后送料数控机床 设备性能Equipment performance:
1.优质铸铁牢固一体化设计，抗震性强，提高整机刚性和定位精度。
2.送料机设计，采用伺服电机送料稳定性好，振动小，噪音小。
3.送料直径，10- -40mm
4.送料长度，50-1500MM
1. High-quality cast iron has a solid integrated design, strong shockresistance, and improves the rigidity and positioning accuracy of thewhole machine.
2. The design of the feeder is first- class, and the servo motor is used forfeeding with good stability, low vibration and low noise.
3. Feeding diameter, 10- 40mm
4. Feeding length, 50-1500MM
设备参数：
| 主要参数 | The main parameters | 单位Unit | XG-D-40 |
| 主轴单元通孔 | Spindle unit through hole | mm | φ48 |
| 最大通棒料直径 | Maximum diameter of pass bar | mm | φ40 |
| 床身上最大回转直径 | Maximum turning diameter of bed | mm | 420 |
| 床身结构 | Bed structure | 斜床身38° | |
| 电主轴最高转速 | Motor spindle speed | r/min | 4500 |
| X轴有效行程 | X Axis effective stroke | mm | 700 |
| Z轴有效行程 | Z Axis effective stroke | mm | 450 |
| X/Z轴丝杆 | X/Z Axis screw | mm | 3208/3210 |
| X/Z轴滚柱线性导轨 | X/Z axis roller linear guide | mm | 30 |
| X/Z轴快移设定速度 | X/Z Axis rapid traverse setting speed | m/min | 18 |
| X/Z轴重复定位精度 | X/Z Axis repeat positioning accuracy | mm | 0.005 |
| X/Z轴绝对定位精度 | X/Z Axis absolute positioning accuracy | mm | 0.005 |
| 主轴分度重复定位精度 | Spindle index repeat positioning accuracy | ≤20角秒，即0.006° | |
| 主轴分度绝对定位精度 | Absolute positioning accuracy of spindle indexing | 70角秒，即0.02° | |
| 主轴(C轴)电机(选配) | Spindle (C axis) motor (optiona) | KW | 3.7 |
| X/Z轴伺服电机(选配) | X/Z Axis servo motor (optional) | N/m | 6N.m/10N.m |
| 整机重量(铸铁或钢板机座) | Whole machine weight (cast iron or steel plate base) | KG | 1800 |
| 长X宽X高 | L X W X H | mm | 1950X1260X1700 |
所有评论仅代表网友意见，与本站立场无关。