广告招募

当前位置:全球装备网 > 技术中心 > 所有分类

法国轴承后置代号,SNR轴承后缀

2023年06月20日 08:24:20      来源:上海达祉机械设备有限公司 >> 进入该公司展台      阅读量:11

分享:

Increased capacity

C3(J30) Radial clearance of the group ISO 3

C4 Radial clearance of the group ISO 4

D.. Special grease

E - EE Sealing by nitrile seal

E3 -EE3 Sealing by high temperature seal

F... Special function

G14 - G15 Polyamide cage

2RS Two-side sealing for thin section ball bearings

2Z Two-side protection for thin section ball bearings

Z -ZZ Protection by metal shields

Y Brass cage


2RS Two-side sealing

D136 Food grade grease


FT. LT: manufactured in normal tolerance class and increased clearance class C3.

HT: manufactured in normal tolerance class and increased clearance class C4.

HV: manufactured with high precision balls and in tolerance class that meets ISO 6

standards for high accuracy. Clearance class C3.

F600: manufactured in special clearance class, up to C5 defined by the standards.


SUC Stainless steel bearing inserts with set screws for use in stainless steel housings

SES

Stainless steel bearing inserts with eccentric locking collar for use in stainless steel

housings

MUC Stainless steel bearing inserts with set screws for use in thermoplastic housings

C3 Radial clearance group ISO 3

C4 Radial clearance group ISO 4

G2 Bearing inserts with SNR re-lubrication system (4 bores in outer diameter)

H Bearing inserts equipped with adapter sleeves

L3 Bearing inserts equipped with 3-lip seal

T04 Bearing inserts for operating temperatures down to -40 °C (-40 °F)

T20 Bearing inserts for operating temperatures up to +200 °C (+400 °F)

版权与免责声明:
1.凡本网注明"来源:全球装备网"的所有作品,版权均属于兴旺宝装备总站,转载请必须注明兴旺宝装备总站。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。