SCRAPE TEST MACHINE刮痕测试试验机（中文资料）

符合标准

BS 3962-6:1980 Part 6: Assessment of resistance to mechanical damage

标尺主要技术参数

标尺刻度：0-10N

刻度精度：

刻度偏差：±3%

10N以上力值处理办法：附加5N砝码

试验力：15N（可拓展至更大的试验力值）

刀头主要技术参数

刮擦样品处角度：89°

刮擦样品处直径：

刀片厚度：10mm

试验时与样品所成角度：90°

破损刀头处理办法：丢弃后更换新件

材料：碳化钨钢

材料特性：硬而易裂

样品托盘主要技术参数

样品尺寸：宽238±2mm，厚度为产品厚度，长度依照试验要求自行设定，但不可小于66mm；

样品厚度：30mm

移动距离：200mm

测试移动时间：10s

测试复位时间：10s

测试中断电解决办法：重新通电后自行回零

操作功能键

电源键：通电后电源键亮灯，按下通电，再按下断电

复位键：测试结束后按下，样品盘回零

测试键：样品盘回零后，按下样品盘向右以20mm/s的速度移动200mm

设备基本参数

电源：220V 50Hz

功率：小于50W

设备尺寸（约）：*300*170mm

发货清单

SCRAPE TEST MACHINE刮痕测试试验机主机，钨钢特制刀片，说明书，合格证。

SCRAPE TEST MACHINE刮痕测试试验机（英文资料）

Standard Coincided

BS 3962-6:1980 Part 6: Assessment of resistance to mechanical damage

Main parameter of scale

Force Value：0-10N

scale division：

deviation of division：±3%

Method of Force Value above 10N: Adding 5N Weight

Maximum test force: 15N (can be extended to larger test force value)

Main Technical Parameters of Cutter Head

Sample scraping angle: 89°

Sample scraping diameter:

Blade thickness: 10mm

The angle between the blade and the sample when testing: 90°

Disposal of damaged blade head: Replacement of new parts after discarding

Material: Tungsten Carbide Steel

Properties of material: Hard and Crackable

Main Technical Parameters of Sample Pallet

Sample size: 238 + 2mm wide, product thickness, length according to test requirements, but can not be less than 66mm;

Maximum thickness of sample: 30mm

Moving distance: 200 mm

Test time: 10s

Reset time: 10s

Solution to test power interruption: self-return to zero after re-energizing

Operating function key

Power key: power key lights up after power on, power is on after the key is pressed, then off after another press

Reset key: press the key after test and the sample pallet will return to zero

Test key: After the sample pallet returns to zero, press the key then the sample pallet will move 200mm to the right at a speed of 20 mm/s.

Basic parameters of equipment

Power supply: 220V 50Hz

Power: less than 50W

Equipment Dimensions (Approximate): *300*170mm

Shipping list

Mainframe of scraper test machine, Blades of tungsten steel special, Specifications, Certification.