Normal 0 false 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE
913 Mark III 非LGA 1913 Mark III LGA 在达到最小的Delta T和重复性的前提下链速高达1.4米/分钟，以配合高速贴片机产线，高产量生产要求。 产出能力和严格的工艺控制 的热传导源于高容量、高风速的加热模组，其小于1秒的反应度速度和小于0.1摄氏度的控温精度产生了的热传导，所以保证了在重载时温度曲线的完整性 较宽的工艺窗口适应了多种曲线要求-多种不同的产品可使用同一温度设定 *的5通道热电偶温度曲线制作和工艺参数记录能力，存储超过500个程式和500个温度曲线。 配备高能力26英寸宽加热器模组，1913 Mark III系统回焊炉对于不同的产品，有着的灵活性。 过板尺寸可至20英寸，且同时配备 EHC和网带。 MK III 系列 总长度 加热区数量/加热区总长度 冷却区数量 1913 Mark III 回流焊炉 589厘米（232英寸） 13个上加热区 / 13个下加热区 3个上冷却区(空气炉) 4 个上冷却区（氮气炉）/ 下冷却区（可选）
| ||
| 1913MK5 (Air) | 1913MK5 (Nitrogen) |
Electric Supply | ||
Power Input (3 Phase) Standard | 480 volts | 480 volts |
Breaker Size | 100 amps @ 480v | 100 amps @ 480v |
kW | 12 - 19 Continuous | 12 - 19 Continuous |
Typical Run Current | 30 - 40 amps @ 480v | 30 - 40 amps @ 480v |
Optional Power Inputs Available | 208/240/380/400/415/440/480 VAC | 208/240/380/400/415/440/480 VAC |
Frequency | 50/60 Hz | 50/60 Hz |
Sequential Zone Turn On | S | S |
Dimensions | ||
Overall Oven Dimensions | 232" (590cm) L x 60" (152cm) W x 63" (160cm) H | 232" (590cm) L x 60" (152cm) W x 63" (160cm) H |
Typical Net Weight | 5445 lbs. (2470 kg) | 6217 lbs. (2820 kg) |
Typical Shipping Weight | 6945 lbs. (3150 kg) | 7584 lbs. (3440 kg) |
Typical Shipping Dimension | 244" x 73" x 83" | 620 x 185 x 210 cm |
Computer Control | ||
AMD or Intel Based Computer | S | S |
Flat Screen Monitor w/Mount | S | S |
Windows Operating System | Windows 10Home | Windows 10Home |
Auto Start Software | S | S |
Data Logging | S | S |
Password Protection | S | S |
LAN Networking | O | O |
Inert Atmosphere | ||
Minimum PPM Oxygen | - | 10-25 PPM* |
Waterless Cooling w/ Flux Separation System | - | O |
Nitrogen On/Off Valve | - | O |
Oxygen Monitoring System | - | O |
Nitrogen Standby System | - | O |
Typical Nitrogen Consumption | - | 500 - 700 SCFH |
Additional Features | ||
KIC Profiling Software | S | S |
Signal Light Tower | S | S |
Powered Hood Lift | S | S |
Five (5)Thermocouple Profiling | S | S |
Redundant Alarm Sensors | O | O |
Intelligent Exhaust System | O | O |
KIC Profiler / ECD Profiler | O | O |
Center Board Support | O | O |
Board Drop Sensor | O | O |
Board Counter | O | O |
Bar Code Reader | O | O |
Custom Paint & Decal | O | O |
Battery Backup for Conveyor and PC | O | O |
GEM/SECS Interfacing | O | O |
*May require additional hardware to achieve these levels Varies with PPM, PCB size and oven configuration
所有评论仅代表网友意见，与本站立场无关。