吸附式干燥机可分为三种:无热再生吸附式干燥机，微热再生吸附式干燥机和组合式干燥机。由于脱水原理的限制，冷冻式干燥机处理后的空气压力露点温度只能达到：2--8℃，在一些空气品质要求较高的场合，不能满足用气要求，只能使用吸附式干燥机和组合式干燥机。吸附式干燥机是根据变压吸附原理，利用干燥机本身*的微孔，通过毛细作用吸附空气中的水分，利用自身及微热再生方法对压缩空气进行吸附干燥，使其能达到露点温度为-40--- - 70℃。

欢迎各界同仁来人、洽谈!详细资料至公司索取。我们将以的产品，合理的价格，优质的服务与您密切合作，共谋发展！

企业： 国内热线： 技术咨询：

【进口压缩机国际亚洲配送中心】【中国空压机备品备件营销中心】

微热再生吸附式压缩空气干燥机是一种利用多孔性固体物质（活性氧化铝、13X分子筛）表面的分子力来吸取气体中的水份，同时另一塔里利用压力变化解吸氧化铝所吸收的水分，从而获得较低露点温度、干燥、洁净气体的净化设备.

技术参数进气温度：≤50℃工作压力为：—压力损失：≤

May be divided into three kinds: no heat regenerative adsorption dryer adsorption dryer, tepefaction regeneration adsorption dryer and combined type dryer. Due to the limitation of the dewatering principle, the air pressure dew point temperature of the freezing type dryer can only be reached: 2--8, in some cases, it can not meet the requirement of air quality. The adsorption type dryer is according to a pressure swing adsorption principle, use the dryer's own unique microporous, through the water absorbed from the air by the capillary action by itself and tepefaction regeneration method of compressed air drying by adsorption the reaches the dew point temperature is -40---- 70 DEG C.

Welcome to come from all walks of life to inquire, negotiate. We will be first-class products, reasonable prices, quality service and your close cooperation, and seek common development!

Enterprise official website: domestic hot line: technical advice:

[imported compressorinternational asiadistribution center] [Chinese air compressor spare parts marketing center]

Tepefaction regeneration adsorption type compressed air dryer is a use of porous solids (activated alumina, 13X molecular sieve) surface of molecular force to absorb the moisture in the gas, and another tower using pressure desorption alumina absorbed moisture to obtain low dew point temperature, dry and clean air purification equipment.

Technical parameters: the inlet temperature is not higher than 50 DEG working pressure: pressure loss: less than